User's Manual

Discovering the Voice Network
38 Network Management Configuration
h. Validate the server certificate, and then click Yes.
The new Avaya Aura™ Communication Manager server appears in the Configure CM
Servers dialog box.
i. Repeat Steps a through h for each Communication Manager server you want to add.
When you are finished adding Communication Manager servers, click Next.
The system displays the Configure Global SNMP Parameters dialog box. You can add
one or more sets of SNMP parameters to be used for network discovery and
management access to your network devices.
8. To add one or more sets of SNMP parameters:
a. Click Add SNMP Rule, and choose one of the following options:
l If the SNMP parameters are for an existing user, click Existing SNMPv3 User, and then
select the user from the Select User menu.
l If the SNMP parameters are for a new user, click New SNMPv3 User, and then perform
the following steps:
1. In the User Name field, enter the user name.
2. In the Authentication Password field, enter the password.
3. In the Verify Authentication Password field, re-enter the password.
4. From the Authentication Scheme field, select the scheme.
Note:
Note: For the Communication Manager servers, the SNMPv3 Authentication Scheme
must be MD5.
5. In the Privacy Password field, enter the privacy password.
6. In the Verify Privacy Password field, re-enter the privacy password.
l If you want to configure the SNMPv1 Community, click SNMPv1 Community, and then
perform the following steps:
1. In the Read Community field, enter the Read Community string.
2. In the Read/Write Community field, enter the Read/Write Community string.
b. Click Next.
The new SNMP parameters appear in the Configure Global SNMP Parameters dialog
box.
c. Repeat steps a and b for each set of SNMP parameters you want to add.
d. When you are finished configuring the global SNMP parameters, click Next.
The system displays the Configure Network Subnet to Discover dialog box.
9. In the Configure Network Subnet to Discover dialog box, perform the following steps:
a. Click Add Subnet to add the IP network you want to discover.