User's Manual
Post installation tasks for Avaya Aura™ Communication Manager
34 Network Management Configuration
6. In the command prompt window run the following command:
C:\Program Files\copSSH\bin>mkgroup -d >> domain.txt
The command looks for the domain groups. The run time of the command can take some
time depending on the number of groups in the domain. The output of the command is
printed in the file domain.txt. When the command is finished running, open the file
domain.txt and locate the line for the group Domain Users. It should look like:
Domain Users:S-1-5-21-790525478-1343024091-1801674531-513:10513
7. Open the directory C:\Program Files\copSSH\etc. Open the file group for editing and add
the ouput of the command in step 6 to the file.
8. In the directory C:\Program Files\copSSH\etc open the file sshd_config for editing.
Locate the line #IgnoreRhosts yes and replace this line with IgnoreRhosts no.
9. Open the services window and stop the copSSH Server service. Then start the copSSH
Server service.
The COPSSH Server is now configured and can be tested by using Putty or WinSCP to log in to
the COPSSH Server.
Configuring the Software Update Manager
To enable the domain user you created in the Software Update Manager in the procedure
Configuring the COPSSH Server
, perform the following steps:
1. From the Network Management Console, select Tools > Software Libraries. You can also
click on the Software Libraries icon.
The system displays the Software Libraries properties dialog box in the lower window
pane.
2. In the Type field, select scp&tftp from the drop-down menu.
3. In the SCP User Name field, enter the user name you created in the procedure Configuring
the COPSSH Server.
4. In the SCP Password field, enter the password for the user you created.
5. In the Retype SCP Password field, enter the password again.
6. In the SCP Server Path field, enter the path for the domain user you created. The default
path is C:\Documents and Settings\username.
7. Click Add.
The domain user is now able to use the Software Update Manager for TN circuit pack firmware
downloads.