User's Manual

Device Managers
Issue 1 June 2010 19
The Provisioning and Installation Manager supports the following media gateways:
-Avaya G250
- Avaya G250–BRI
-Avaya G250-DS1
-Avaya G250-DCP
-Avaya G350
-Avaya G430
-Avaya G450
-TMG550
You can perform initial gateway configuration in the following ways:
- In a staging environment using a Local Area Network (LAN) to simulate the customer
LAN
- On the customer premises with the assumption that either LAN connectivity exists to
Provisioning and Installation Manager or Wide Area Network (WAN) connectivity has
been provided through an external router to the Provisioning and Installation Manager.
Device Managers
Device managers are applications that are tailored to manage and monitor Avaya media
gateways and LAN and backbone switches. Device managers allow you to set up, configure,
monitor, manage, and diagnose all Avaya network devices. The Device Manager provide a
real-time view of each device, called the “chassis view.” The chassis view uses color coding to
indicate individual port, module, and LAG status. You can use the device manager to configure
port, LAG, and VLAN settings, port security, redundancy modes, and all other device
parameters. An example of an Avaya device manager is shown in Figure 1
.