User's Manual

iii. In the Retry timeout field, use the up and down arrows to set the
amount of time to elapse before the page is repeated. The time is
set in 15–second increments.
b. To configure Centrex Transfer for this DTMF breakout, select Centrex Transfer
and then enter the transfer number in the Transfer Number field.
c. To configure an extension number for this DTMF breakout, select the
appropriate extension number from the Reception/Breakout (DTMF 0) drop-
down box.
11. For the Breakout (DTMF 2) drop-down box, repeat step 10.
12. For the Breakout (DTMF 3) drop-down box, repeat step 10.
13. In the SIP Name field, enter the appropriate name.
14. In the SIP Display Name (Alias) field, enter the appropriate name.
15. In the Contact field, enter the appropriate name.
16. Configure the Anonymous check box as appropriate. This feature is enabled when
this check box is selected.
Note:
For more information about the fields in the SIP Settings section, see the IP Office
Manager on-line help.
Configuring Standalone Voice Mail
Implementing Standalone Voice Mail for the Avaya B5800 Branch Gateway June 2012 21