User's Manual

Procedure
1. Open IP Office Manager and receive the B5800 Branch Gateway configuration.
2. Select File > Advanced > Memory Card Command > Startup.
3. In the Select IP Office window, click the check box for the appropriate system.
4. Click OK.
Starting up a memory card using System Status
About this task
Use this task to restart a memory card without removing and reinserting it.
Procedure
1. Open System Status and access the status output.
2. In the navigation pane, select System > Memory Cards.
3. Click System SD or Optional SD.
4. At the bottom of the window, click Startup.
Starting up a card using a system phone
About this task
A user configured as a system phone user can perform this procedure using a 1400, 1600, or
9600 Series phone (excluding XX01, XX02 and XX03 models). The user's login code is used
to restrict access to system administration functions on the phone.
Procedure
1. Select Features > Phone User > System Admin.
2. Enter your B5800 Branch Gateway user login code.
3. From the menu select Memory Card.
4. Choose one of the following:
• Select System for the System SD card
• Select Option for the Optional SD card.
Memory card startup
Implementing Embedded Voicemail for Avaya B5800 Branch Gateway June 2012 67