User's Manual

Shutting down a memory card using a system phone
About this task
To shut down a memory card using a system phone, you must be administered as a System
Phone user. You can shut down a memory card using a 1400, 1600, or 9600 series phone.
Your Login Code is used to restrict access to some system administration functions on the
phone.
Procedure
1. Select Features > Phone User > System Admin.
2. Enter your B5800 Branch Gateway user login code.
3. Select Memory Card.
4. Select System for the System SD card or Option for the Optional SD card.
5. Select Shutdown.
6. At the back of the control unit, confirm that the appropriate memory card LED is
off.
7. Remove the card.
Memory card startup
Reinserting a memory card into a system that is already switched on will automatically restart
card operation. However, if the card has been shutdown but not removed, it can be restarted
without requiring a reboot.
Starting up a memory card using Manager
About this task
Use this task to restart a memory card without removing and reinserting it.
Perform this task using IP Office Manager that is installed on a PC for the branch. You cannot
perform this task from Manager that is accessed from System Manager. If the B5800 Branch
Gateway is centrally managed by System Manager, you must disable the System Manager
administration feature for the branch (by disabling Under SMGR Administration in Security
Settings) before you perform this task. For more information, see “Disabling the System
Manager administration feature for the branch” in Implementing the B5800 Branch Gateway
for an Avaya Aura
®
Configuration, document number 18-603853.
Miscellaneous
66 Implementing Embedded Voicemail for Avaya B5800 Branch Gateway June 2012
Comments? [e-mail]