User's Manual

Button Programming tab field descriptions
Name Description
Voicemail Collect Allows access to a mailbox to collect or leave messages.
The mailbox and action are determined by the
associated telephone number. This takes the form ?
Name for message collection and #Name for leaving a
message. The Name variable must match the user or
hunt group name set in the B5800 Branch Gateway
configuration. On suitable phones the DSS key displays
VMCol followed by the name.
Voicemail Off This option switches the diversion of calls to the user or
group mailbox off.
Voicemail On This option switches the diversion of calls to the user or
group mailbox on. When programmed on a DSS key, the
action toggles so no separate Voicemail Off key is
required. On suitable phones the DSS key displays
VMCol.
Voicemail Ringback Off This option switches new message ringback notification
off.
Voicemail Ringback On This option switches new message ringback notification
on. When programmed on a DSS key, the action toggles
so that no separate Voicemail Ringback Off key is
required. On suitable phones the DSS key displays
VMRB+.
Visual Voice
A user can be provided a display menu to use for access to their mailbox. The menu provides
the user with options to listen to messages, send messages, and change their greetings and
password.
Configuring a Visual Voice button
About this task
Perform this task using IP Office Manager that is installed on a PC for the branch. You cannot
perform this task from Manager that is accessed from System Manager. If the B5800 Branch
Button Programming tab field descriptions
Implementing Embedded Voicemail for Avaya B5800 Branch Gateway June 2012 61