User's Manual

Remaining
156165796mS LVM(housekeeping): FMML Size: 35
Result
Embedded Voicemail events are now shown in the Monitor trace when running. These events
are all prefixed LVM.
Configuring buttons
About this task
The same features used for Embedded Voicemail short codes can also be assigned to
telephone buttons.
Perform this task using IP Office Manager that is installed on a PC for the branch. You cannot
perform this task from Manager that is accessed from System Manager. If the B5800 Branch
Gateway is centrally managed by System Manager, you must disable the System Manager
administration feature for the branch (by disabling Under SMGR Administration in Security
Settings) before you perform this task. For more information, see “Disabling the System
Manager administration feature for the branch” in Implementing the B5800 Branch Gateway
for an Avaya Aura
®
Configuration, document number 18-603853.
Procedure
1. Open IP Office Manager and receive the B5800 Branch Gateway configuration.
2. In the left navigation pane, click User.
3. Click the required user.
4. Click the Button Programming tab.
5. Click the button line that you want to change.
6. Click Edit.
The Edit Button fields are shown at the bottom of the window.
7. Next to the Action field, click the … button.
8. Select Advanced > Voicemail to display the list of voicemail features.
9. Configure the fields as appropriate. See
Button Programming tab field
descriptions on page 61 for more information.
10. Repeat steps 4 through 9 for all the keys required.
11. Click OK.
12. Repeat this procedure for other users as required.
13. Select File > Save Configuration to save the changes back to the system.
Miscellaneous
60 Implementing Embedded Voicemail for Avaya B5800 Branch Gateway June 2012
Comments? [e-mail]