User's Manual

LED Description
System SD
• Green on = card present
• Green flashing = card in use
• Orange steady = reset imminent
• Red flashing = card initializing or shutting
down
• Red fast flashing = card full
• Red steady = card failure/wrong type
CPU
• Alternate red/green = starting up
• Green on = okay
• Red on = no software
• Flashing Red = error/shutdown
Base card LEDs
Base Card LEDs 1 to 8 Usage
All cards LED1 is used for base card status:
• Red on = error
• Red slow flash = initializing
• Red flash every 5 seconds = card okay
• Red fast flash = system shutdown
Analog phone No status LEDs are used for analog phone
extensions.
Digital station Green on = phone detected
VCM LEDs 1 to 8 are unlabelled. They are used to
indicate voice compression channel usage.
Each LED lit represents 12.5% of the
available voice compression channel
capacity in use (total card capacity rather
than licensed capacity).
4-port expansion LEDs 1 to 8 are used for the expansion ports
on the rear of the control unit. LEDs 9 to 12
are used for the card's own expansion
ports.
• Green on = expansion module present
• Red flashing = initializing
• Red on = error
• Orange regular flash = base card okay
Combination LEDs 1 to 6
Green on = phone detected
Applying power to the system
Implementing the Avaya B5800 Branch Gateway November 2011 77