User's Manual

Property Value
Audio Format PCM
Length Up to 90 seconds.
Procedure
1. Rename the music file holdmusic.wav.
2. Using a card reader, copy the file into the /system/primary folder on the System
SD memory card.
3. If the B5800 Branch Gateway system is configured for additional music-on-hold files
(up to 3 additional files), copy those files to the same location.
The name of the additional files must match those specified in the B5800 Branch
Gateway system configuration.
9600 series phones screen saver file
When idle, 9600 Series phones can timeout and display a screen saver image. A file,
96xxiposs.jpg, is present on the cards by default.
You can replace this file with your own branded file. The file should be smaller than the screen
size on 9600 Series phones in order for the image to move around the screen.
Base and trunk card installation
The base cards and trunk daughter cards should be fitted before power is applied to the control
unit. Ensure that cards are inserted in the order that matches the planned or pre-built
configuration. In general, the following applies to card installation:
• Cards can be fitted in any order into any available slots. The only exception is the 4-port
expansion card which can only be installed in right-hand slot 4.
• It is recommended that cards are fitted from left to right.
• There are restrictions to the number of supported cards of some types. When a limit is
exceed, the right-most card of that type will not function.
• Ensure that you use the labels supplied to identify the card fitted into the control unit.
Base and trunk card installation
Implementing the Avaya B5800 Branch Gateway November 2011 53