User's Manual

Configuring AAR
1. Enter the change aar analysis command to add an entry for the extension range
corresponding to the branch survivable extensions
2. Enter the following values for the specified fields, and retain the default values for
the remaining fields.
a. In the Dialed String field, enter the dialed prefix digits to match on.
b. In the Total Min field, enter the minimum number of digits.
c. In the Total Max field, enter the maximum number of digits.
d. In the Route Pattern field, enter the route pattern number configured for
these extensions.
e. In the Call Type field, set this to aar.
ARS Access Code
The example configuration designates 9 as the ARS Access Code. This is shown below on
Page 1 of the change feature-access-codes form. Calls with a leading 9 will be directed to
the ARS routing table.
Configuring AAR
Implementing the Avaya B5800 Branch Gateway November 2011 321