User's Manual

Configuring SIP trunk groups
Next, SIP trunk groups need to be added.
1. Enter the add trunk-group n command, where n is an available trunk group number
to add to SIP trunk groups.
2. Enter the following values for the specified fields, and retain the default values for
the remaining fields.
a. In the Group Type field, enter sip.
b. In the Group Name field, enter a description for the trunk group.
c. In the TAC field, enter an available trunk access code as per the dial
plan.
d. In the Service Type field, enter tie.
e. In the Signaling Group field, enter the signaling group number .
f. In the Number of Members field, enter the number that is equal to the
maximum number of concurrent calls supported.
Navigate to Page 3, and enter private for the Numbering Format field as shown below. Use
default values for all other fields.
Configuring SIP trunk groups
Implementing the Avaya B5800 Branch Gateway November 2011 319