User's Manual

personnel may result in violation of the FCC rules. Qualified personnel may adjust gain settings
above these levels only where:
• Measurement is made to ensure that the power levels sent to line at each network
interface connected does not exceed the maximum levels specified in FCC part 68 section
68.308(b) and TIA/EIA-IS-968 Section 4.5 for that specific interface type.
• Where gain adjustment away from the default values are made, precautions should be
taken to ensure that the connection of terminal equipment is controlled by qualified
installation personnel.
• To conform with the Receive Objective Loudness Rating at distances greater than 2.7km
from the central office, on analog trunks a receive gain of 1.5dB must be set.
Regulatory Instructions for Use
Implementing the Avaya B5800 Branch Gateway November 2011 285