User's Manual

Shutting down a memory card using System Status
Procedure
1. Start System Status and access the status output.
2. In the navigation panel select System.
3. Select Memory Cards.
4. Select either System Card or Optional Card.
5. At the bottom of the screen select Shutdown.
6. At the back of the control unit, confirm that the appropriate memory card LED is
off.
7. Remove the card.
Card startup
Reinserting a memory card into a system that is already switched on will automatically restart
card operation. However, if the card has been shutdown but not removed, it can be restarted
using Manager without requiring a reboot.
Starting up a card using Manager
Procedure
1. Start Manager.
2. Select File > Advanced > Memory Card Commands > Startup.
3. From the Select IP Office window, select the system containing the memory card.
4. Click OK.
SD card management
272 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]