User's Manual

takes a few seconds. When the process has been completed, the B5800 Branch
Gateway system is restarted.
Restoring a configuration file from the Optional SD card using a
system phone
About this task
A user configured as a system phone user can perform this procedure using a 1400, 1600, or
9600 Series phone (excluding XX01, XX02 and XX03 models). The user's login code is used
to restrict access to system administration functions on the phone.
Procedure
1. Select Features > Phone User > System Admin.
2. Enter your B5800 Branch Gateway user login code.
3. From the menu select Memory Card.
4. Select Upgrade Config.
The configuration file config.cfg and licenses file keys.txt in the primary folder on
the Optional SD card are copied to the primary folder on the System SD card. This
takes a few seconds. When the process has been completed, the B5800 Branch
Gateway system is restarted.
Restoring software files from the Optional SD card using Manager
Procedure
1. Start Manager.
2. Select File > Embedded File Management.
3. From the Select IP Office window, select the appropriate system.
The file contents of the memory cards are displayed.
4. Select File > Upgrade Binaries.
All files in the primary folder on the Optional SC card except the configuration file
config.cfg and licenses file keys.txt are copied to the primary folder on the System
SD card. This takes approximately 5 minutes. When the process has been
completed, the B5800 Branch Gateway system is restarted.
SD card management
266 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]