User's Manual

2. Enter your B5800 Branch Gateway user login code.
3. From the menu select Memory Card.
4. Select Copy.
The contents of the System SD card are copied to the Optional SD card. This takes
at least 90 minutes and can take much longer.
About restoring from the Optional SD card
The files in the primary folder on the Optional SD card can be copied to the primary folder on
the System SD card. Files with matching file names are replaced.
There are two levels of restore that can be performed:
• Restoring only configuration files from the Optional SD card — Only the
configuration file config.cfg and the licenses file keys.txt are copied from the Optional SD
card to the System SD card.
• Restoring only software files from the Optional SD card — All files in the primary
folder except the configuration file config.cfg and licenses file keys.txt are coped from the
Optional SD card to the System SD card. This process does not restore embedded
voicmail prompts. This process takes approximately 5 minutes.
Being able to restore just the software files allows software files to be copied from an Optional
SD card without affecting the existing configuration of that system.
Warning:
This procedure will cause the B5800 Branch Gateway system to be restarted, disconnecting
any current calls and services in progress.
Restoring a configuration file from the Optional SD card using
Manager
Procedure
1. Start Manager.
2. Select File > Embedded File Management.
3. From the Select IP Office window, select the appropriate system.
The file contents of the memory cards are displayed.
4. Select File > Upgrade Configuration.
The configuration file config.cfg and licenses file keys.txt in the primary folder on
the Optional SD card are copied to the primary folder on the System SD card. This
About restoring from the Optional SD card
Implementing the Avaya B5800 Branch Gateway November 2011 265