User's Manual

Characteristics Admin/Software and Hardware/
Software
• Country: USA
• Language: English (USA)
• Auto Answer: Yes
• AllowDial: Yes
• Allow User Setup: Yes
• Maximum Time on Call: 480
• Country Code: 1
• Area Code: 732
• Number A: blank
• Number B: blank
• ISDN Switch Protocol: Standard
ETSI Euro-ISDN
User Setup Admin/Video Network/IMUX
• Auto Answer: Yes
• PIP: Auto
• Far Control of Near Camera: Yes
• MP Mode: Auto
• Numbers: blank
• SPID: blank
• Audio Quality: 168KB/s
• Advanced Dialing: Dial Channels in
Parallel
System Information Admin/Software and Hardware/
Hardware
• Release: 7.0.1
• Model: VS: 512
• Camera: NTSC
• Video Comm Interface:
ISDN_Quad_BRI
• Network Interface Type: S/T Interface
Admin/Video Network Admin/Video Network/Call
Preference
• MultiPoint Setup: Auto • ISDN Video Calls (H:320): Yes
SNMP
SNMP (Simple Network Management Protocol) is a standard network protocol that allows the
monitoring and management of data devices across a network. An SNMP agent can be built
into network devices such as routers and hubs. An SNMP manager application, for example
CastleRock or HP OpenView, can then communicate with those devices.
B5800 Branch Gateway supports SNMP communication. This communication can be:
• Polling: Some SNMP applications (called "managers") send out polling messages to the
network. They then record the responses of any SNMP enabled devices (called "agents").
Additional installation and system procedures
236 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]