User's Manual

Manager automatically propagates the number change to any hunt groups,
incoming call routes, user buttons, bridged appearance buttons and call
coverage appearance buttons associated with the user's original extension
number.
If the user has an extension with which they are associated by being the
extension's Base Extension setting, that setting is not automatically updated.
If the user should still be associated with that extension by default, the
extension must be updated manually to match the user's new extension
number.
5. To update the user's Base Extension setting, select Extension.
6. On the Extn tab, in the Base Extension field, change the base extension number
to match the user extension who should now be associated with that extension port
by default.
7. Click OK.
Note:
If a validation error message appears due to a user being associated with two
extensions, ignore the message until all the user moves have been completed.
8. Repeat steps 2 through 7 for each user whose extension number you need to
change.
9. Click
to revalidate the configuration and check that there are no conflicts between
users and associated extensions.
10. Send the configuration back to the B5800 Branch Gateway and select appropriate
settings for the reboot.
B5800 Branch Gateway software upgrade
The B5800 Branch Gateway Manager includes B5800 Branch Gateway software files for
control units, external expansion modules and phones appropriate to the system's software
level. The B5800 Branch Gateway system can be upgraded in two ways:
• Using the B5800 Branch Gateway Manager upgrade wizard. See
Using the upgrade
wizard on page 230.
• Using the System SD card. See System upgrade using the System SD card on
page 267.
Note:
Check the latest B5800 Branch Gateway Technical Bulletin for the B5800 Branch Gateway
software release before proceeding any further. It may contain information relating to
Additional installation and system procedures
228 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]