User's Manual

Chapter 13: Additional installation and
system procedures
The following topics are provided in this chapter:
•
Switching Off an IP Office System on page 219
• Rebooting an IP Office System on page 221
• About changing components on page 222
• Swapping Extension Users on page 226
• About changing extension numbers on page 226
•
B5800 Branch Gateway software upgrade on page 228
• External output port (EXT O/P) on page 231
• Example of BRI So8 module configuration on page 233
• SNMP on page 236
•
DTE Port Maintenance on page 242
• Reset Button Usage on page 250
• AUX Button Usage on page 251
• Creating a WAN Link on page 251
System shutdown
B5800 Branch Gateway systems can be shut down in order to perform maintenance. The shut
down can be either indefinite or for a set period of time after which the B5800 Branch Gateway
will automatically reboot. During the shut down process, the current configuration in the control
unit's RAM memory is copied to the System SD card.
Warning:
• A shutdown must always be used to switch off the system. Simply removing the power
cord or switching off the power input may cause errors.
• This is not a polite shutdown, any users calls and services in operation will be stopped.
Once shutdown, the system cannot be used to make or receive any calls until
restarted.
Implementing the Avaya B5800 Branch Gateway November 2011 219