User's Manual

Feature Normal operation Survivability mode with
B5800 Branch Gateway
Call Management Yes (CM COR) Yes (Some restrictions can
be configured in the B5800
Branch Gateway either at the
system level or for the user.)
Calling party block/
unblock
Yes Yes*
Call park Yes Yes*
Call unpark Yes Yes*
Call pickup Yes Yes*
Directed call pickup Yes Yes*
Extended call pickup Yes Yes*
Priority call Yes Yes*
Auto callback Yes Yes*
Malicious call trace Yes No
Malicious call trace cancel Yes No
EC500 Yes Calls arriving at core
Communication Manager will
still be sent to cell phone.
Calls arriving at a branch site
can be sent to cell phone if
Mobile Twinning feature is
set.
Extend active call and EC500
on/off not available in 96xx
phone UI
Transfer to voicemail Yes No
Bridge line and call
appearances
Yes No
Hold recall Yes Yes
Transfer recall Yes Yes
Busy Indicator Yes No
* Not available through the phone menus. However, similar features are supported by B5800
Branch Gateway and can be invoked by the survivable phone by dialing the appropriate B5800
Branch Gateway feature access codes (i.e. short codes). If the default B5800 Branch Gateway
short code for the feature ends with a #, then it has to be changed in the B5800 Branch Gateway
configuration to a short code that does not end with a # and can be dialed by the 9600 Series
SIP phones.
Extension administration
206 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]