User's Manual

Name Default Description
digital and IP extensions, this
value is fixed as On.
Reset Volume After Calls Default = Off If selected, resets the
phone's handset volume
after each call.
Device Type Default = Unknown SIP
device
This is an information field
only. If the configuration has
been loaded from a system
with SIP extensions currently
registered, the current type of
SIP phone is listed if
recognized.
Module This field indicates the
external expansion module
on which the port is located.
BP indicates an analog
phone extension port on the
base or control unit. BD
indicates a digital station
(DS) port on the control unit.
BD and BP is also followed
by the slot number. VoIP
extensions report as 0.
Port This field indicates the port
number on the module
indicated in the Module field.
VoIP extensions report as 0.
Disable Speakerphone Default = Off When selected, disables the
fixed SPEAKER button if
present on the phone using
this extension port. Only
supported on Avaya phones.
An audible beep is sounded
when a disabled SPEAKER
button is pressed. Incoming
calls such as pages and
intercom calls are still
connected but the speech
path is not audible until the
user goes off-hook using the
handset or headset. Similarly
calls made or answered
using other buttons on the
phone are not audible unless
the user goes off-hook using
the handset or headset.
Extension administration
196 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]