User's Manual

Name Default Description
the B5800 Branch
Gateway system if they
match existing extension
and user entries in the
configuration. If a
centralized (survivable)
extension is allowed to
auto create matching
entries, the extension's
Extension Mode setting
defaults to Local (native)
which is incorrect for a
centralized (survivable)
extension.
• For local (native)
extensions, this setting can
be enabled.
Adding SIP extensions and users to the B5800 Branch Gateway
About this task
For each survivable extension, matching extension and user entries must be added to the
B5800 Branch Gateway configuration. The required information is the extension number, the
user name, and the user password. These values must match those used by the extension
user when logging into the B5800 Branch Gateway system during normal operation. Sufficient
Enterprise Branch User licenses must exist for the survivable extensions to register when
required.
Procedure
1. Start Manager and connect to the B5800 Branch Gateway system.
2. In the left navigation pane, click Extension.
3. Click the New icon and select SIP Extension.
4. Click the Extn tab.
5. Configure the fields as appropriate. See
Extn tab field descriptions on page 178 for
more information.
6. Click OK.
7. In the left navigation pane, click User.
8. Click the New icon and select User.
9. Click the User tab.
Extension administration
194 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]