User's Manual

8. In the Maximum Record Time field, use the up and down arrows to set the
maximum recording length in seconds for recorded announcement and auto
attendant prompts.
Note:
You can set a number in this field only if Use embedded for AA and
Announcements is checked.
9. Click OK.
10. Select File > Save Configuration.
The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Modular Messaging PSTN Fallback
When the branch is configured to use Modular Messaging for its voicemail services, that
configuration includes setting an internal Modular Messaging number (800700 for the following
example) for calls to Modular Messaging which are automatically routed via the Session
Manager line.
An additional Modular Messaging PSTN number can also be configured for use when the
Session Manager line is not in service (915553800701 for the following example). However, it
may also require additional configuration to ensure that this number is correctly routed to a
branch PSTN trunk. That could be done using a system short code, but doing it in the ARS
form keeps all the branch PSTN call routing in one place for ease of maintenance.
Adding an overriding short code
About this task
Procedure
1. Start Manager and connect to the B5800 Branch Gateway system.
2. In the left navigation pane, click ARS.
Modular Messaging PSTN Fallback
Implementing the Avaya B5800 Branch Gateway November 2011 165