User's Manual

12. In the Routing Policies section, click the check box for the routing policy that was
created for the branch.
13. Click Select.
14. If you need to specify that calls from certain locations be denied, do the following:
a. In the Denied Originating Locations section, click Add.
b. Do one of the following:
• Click the Apply to All Originating Locations check box.
• Click the check box(es) for the locations that should be denied.
c. Click Select.
15. On the Dial Patterns Detail page, click Commit.
Session Manager 6.0
The topics in this section provide procedures for configuring Session Manager 6.0 to support
calls to and from B5800 Branch Gateway systems. Perform the following procedures:
1. View the SIP domains for which the Session Manager provides call management.
Multiple domains can be listed. See
Viewing the SIP domains on page 156.
2. Identify logical and/or physical locations where SIP entities reside. IP address
patterns can be used to define different locations within the Avaya Aura
®
network,
for example the IP address range of each B5800 Branch Gateway system. The
creation of locations allows features such as bandwidth management to be applied
to connections from those locations. See
Creating locations on page 156.
3. Create a set of digit adaptations in order to ensure correct routing. If the digits to or
from a branch need alteration in order to be routed correctly at either end, this can
be done using a table of digit adaptations. Each SIP entity (branch) is associated
with its own set of digit adaptations. See
Creating adaptations on page 157.
4. Add each B5800 Branch Gateway system to the list of SIP entities that send calls
to and from the Avaya Aura
®
network. See Creating SIP entities on page 157.
5. Add an entity link for each SIP entity including each B5800 Branch Gateway. An
entity link must be added to define the ports and transport method used for
connections between the SIP entity and the Session Manager. See
Creating entity
links on page 158.
6. Create time ranges to control when different routing policies are used. See Creating
time ranges on page 153.
Session Manager 6.0
Implementing the Avaya B5800 Branch Gateway November 2011 155