User's Manual

5. Click OK.
6. Click the VoIP tab.
7. Click the Allow Direct Media Path check box to select this option.
8. Click the Re-Invite Supported check box to select this option.
9. Configure the remaining fields as appropriate. See
VoIP tab field descriptions on
page 116 for more information.
10. Click OK.
11. Select File > Save Configuration.
The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Session Manager tab field descriptions
Name Description
Line Number This value is automatically assigned by
B5800 Branch Gateway and should be
unique for each line added to the
configuration.
In Service The default setting is enabled. This option
can be used to manually take the Session
Manager line out of service. It does not reflect
or set the actual state of the line.
SM Domain Name This name should match a SIP domain
defined in the Session Manager system's
SIP Domains table. Unless there are reasons
to do otherwise, all the B5800 Branch
Gateway systems in the Avaya Aura
®
network can share the same domain.
Note:
See Viewing the SIP domains on
page 150 for a list of SIP domains defined
in Session Manager.
SM Address Enter the IP address of the Session Manager
that the line should use in the Avaya Aura
®
network. The same Session Manager should
be used for the matching Entity Link entry in
the Avaya Aura
®
configuration.
Initial configuration for a Distributed Branch
142 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]