User's Manual

Procedure
1. Open a generic CSV text file.
2. Enter the B5800 Branch Gateway IP address and corresponding license file name
in the following format: < IP address of the device>,< License file name >.
Note:
The license file name is comprised of the host ID of the SD card followed by
_HID.xml, for example 111306312781_HID.xml. The host ID is the Feature Key
(FK) serial number printed on the SD card.
3. Repeat step 2 for each IP address/license file pair.
Sample mapping file:
148.147.206.251,111306312781_HID.xml
148.147.206.160,111310198782_HID.xml
148.147.175.145,111313365847_HID.xml
4. Save the file.
Disabling the Network Management administration feature
for the branch
About this task
If you want to administer the branch through Manager and not through Network Management,
you must disable the Network Management administration feature for the branch.
Procedure
1. Start Manager and connect to the B5800 Branch Gateway system.
2. Select File > Advanced > Security Settings.
3. In the Select IP Office window, click the check box for the appropriate system.
4. Click OK.
5. In the Security Service User Login window, enter a user name and password of an
account that has security configuration access to the B5800 Branch Gateway
system.
The defaults are security and securitypwd.
6. In the Security Settings pane, select Services.
7. In the Services pane, select Configuration.
8. In the Service Details pane, click the check box for Under ENM Administration to
deselect this option.
Initial configuration for a Distributed Branch
130 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]