User's Manual

license files, you can create a mapping file for bulk distribution. See Creating a
mapping file on page 129 for more information.
6. To send the license file to the branch, from the Provisioning and Installation Manager
main window, click Import Licenses at the top of the window.
The Import Licenses Job Wizard appears.
7. On the General page, do the following:
a) In the Job Name field, enter a name for this job.
b) In the Notes field, enter notes about this job.
8. Click Next.
9. On the Import Licenses Wizard page, choose one of the following:
• To select a mapping file, click the Select Mapping File option button and then
click Browse to locate the mapping file.
Note:
Mapping files are used for bulk provisioning. See Creating a mapping file on
page 129 for more information.
• To select a device and license file from a list, do the following:
1. Click the Select Devices from list option button.
2. Click the check box for the device.
3. From the corresponding drop-down box, select the license file name
that matches the FK serial number printed on the SD card for the
device.
The IP address of the device is shown as well as the name of the license file
associated with the device. The license file name is created from the host ID
of the SD card and is in the format <host ID of the SD card>_HID.xml, for
example 111306312781_HID.xml. The host ID is the Feature Key (FK) serial
number printed on the SD card.
Note:
Even if the license file name was changed at an earlier point, for example
to make it shorter, the license file name that appears here is derived from
the host ID of the SD card, not the file name as it was renamed.
10. Click Next.
11. On the Check Mapping List page, review the list and then click Next.
12. On the Schedule page, choose one of the following
• Click the Run now option button to import the license files to the devices
now.
• Click the Run the job on option button to run the job at a specified date and
time. Then do the following:
Initial configuration for a Distributed Branch
128 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]