User's Manual

# Description Section
8 Set the branch prefix and local
number length for the extension
numbering.
See Setting the branch prefix and local
number length for extension numbering on
page 137.
9 Change the default codec selection. See Changing the default codec
selection on page 139.
10 Change the maximum SIP sessions. See Changing the maximum SIP
sessions on page 140.
11 Add a Session Manager line. See Adding an Avaya Aura Session
Manager line on page 141.
12 Set up outgoing call routing.
• Setting up outgoing call routing on
page 145.
• For information on routing back to the
branch for fallback alternate routes, see
Branch PSTN call routing examples on
page 325.
13 Configure the type of voicemail
system the branch will use.
See Voicemail operation on page 163.
Note:
Numbers 14 through 22 are performed from Avaya Aura
®
Session Manager.
B5800 Branch Gateway supports Session Manager 6.1 and 6.0 and procedures
for both versions are provided.
14 View a list of the SIP domains.
• For Session Manager 6.1, see Viewing
the SIP domains on page 150.
• For Session Manager 6.0, see Viewing
the SIP domains on page 156.
15 Create a location.
• For Session Manager 6.1, see Creating
locations on page 150.
• For Session Manager 6.0, see Creating
locations on page 156.
16 Create a digit adaptation.
• For Session Manager 6.1, see Creating
adaptations on page 151.
• For Session Manager 6.0, see Creating
adaptations on page 157.
17 Create a SIP entity.
• For Session Manager 6.1, see Creating
SIP entities on page 151.
• For Session Manager 6.0, see Creating
SIP entities on page 157.
Initial configuration for a Distributed Branch
124 Implementing the Avaya B5800 Branch Gateway November 2011
Comments? [e-mail]