User's Manual

The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Automatic codec preference settings
Setting Selected
Preference
2nd Preference 3rd Preference 4th Preference
G.729 G729(a) 8K CS-
ACELP
G711 U-Law
64K
G711 A-Law
64K
G723.1 6K3 MP-
MLQ
G.723 G723.1 6K3 MP-
MLQ
G729(a) 8K CS-
ACELP
G711 U-Law
64K
G711 A-Law
64K
G.711 U-Law G711 U-Law
64K
G711 A-Law
64K
G729(a) 8K CS-
ACELP
G723.1 6K3 MP-
MLQ
G.711 A-Law G711 A-Law
64K
G711 U-Law
64K
G729(a) 8K CS-
ACELP
G723.1 6K3 MP-
MLQ
Changing the maximum SIP sessions
About this task
The Maximum SIP Sessions setting limits the number of concurrent sessions allowed across
all SIP trunks (public exchange and Session Manager). This setting must not exceed the
number of SIP trunk sessions licensed in PLDS. If the PLDS license file is already installed,
the Maximum SIP Trunk Sessions licensed for the system is identified on the PLDS screen
when you select PLDS License on the left navigation pane. If the PLDS license file is not yet
installed, you must still set this feature. This will determine the Avaya Branch Gateway
operation and system capacities during the 30-day grace period that is in effect when the
system is in License Error Mode because the license is not yet installed. Once the PLDS license
is installed, the Maximum SIP Session setting should be changed to match what appears on
the PLDS screen. This will change the License Mode setting that appears on the PLDS screen
to Normal Mode.
Procedure
1. Start Manager and connect to the B5800 Branch Gateway system.
2. In the left navigation pane, click System.
3. Click the Telephony tab.
4. Click the Telephony sub-tab.
5. In the Maximum SIP Sessions drop-down box, select the number that matches
the Maximum SIP Trunk Sessions licensed for the system.
Administering a Session Manager line for each branch
Implementing the Avaya B5800 Branch Gateway November 2011 113