User's Manual

Correcting problems with audio quality
1. Move the cell centre closer to the office or work area in question.
2. Repeat the coverage test in that area and ensure that coverage is sufficient.
This can impact the coverage at other points, and you must ensure that all critical
points are still properly covered by the new location.
3. Go into every location where users make and receive calls.
This includes washrooms, coffee areas, and meeting rooms. Do not speculate
where users can make calls.
Deploying an external basestation
T
o deploy an external basestation follow
Deploying an external basestation on page 95 to
deploy an external basestation.
Deploying an external basestation
1. On the site plan, note each of the critical points that are to be reached.
2. Position the deployment tool at the potential location for a cell centre that is closest
to the critical point.
3. Check for outdoor coverage to the critical point with the deployment handset.
4. If the critical point is reached, your cell centre is at the position of the deployment
tool. Determine the cell boundary. If you cannot reach the critical point, determine
and record the cell boundary that you did reach on the site plan.
5. For each critical point, determine the potential location of external basestations. The
location must be:
a. outdoors,
b. as close as possible to the critical point that you need to reach, and
c. more than 4 m above the highest ground to be covered.
Deploying an external basestation
DMC DECT Fundamentals August 2012 95