User's Manual

5. The FE value is for the FP is the number of received Q1/Q2 bit information within
the last 100 receiving frames (i.e., 1 sec.). For proper deployment, the FE value
must not exceed 5.
6. An RSSI value of -70dBm is used to indicate the cell boundary.
7. Use the following procedure to subscribe a handset that has de-subscribed in error:
a. Long-press the button on the basestation to open the DECT system.
b. On the handset, navigate to Menu > System > Subscription > New.
c. Enter the PARK number provided at the bottom of the basestation.
d. Enter the authorization code (the last 4 digits of the serial number located
at the bottom of the basestation).
The handset subscribes with the basestation.
DECT Deployment Kit 2
DMC DECT Fundamentals August 2012 89