User's Manual

Figure 53: Deployment tool battery details
T
able 15: Deployment tool battery details key
a battery mount
b Allen screws
c thumb screw
d battery pack
e guides
f thumb screw nut
g power cord
h power cord receptacle
i tripod
Assembling the deployment tool
1.
Set up the tripod.
Remove the tripod from its carrying case and set upright. Lock the casters.
2. If required, install the extension arm fitting on the tripod. If not required, go to step
4.
Place the extension arm fitting, shown in
Figure 56: Deployment Kit 2 and carrying
case on page 88, onto the brass fitting on the top of the tripod.
Site planning
82 DMC DECT Fundamentals August 2012
Comments? [e-mail]