User's Manual

Charging the deployment tool battery
Charge the deployment tool battery for at least six hours before using.
Caution:
Equipment Damage
Use the
Avaya battery charger. This charger is a separately ordered item. Failure to use an
automatic shut-off battery charger can damage the battery.
Do not use the battery supplied with the CT2 deployment tool. The CT2 and DECT batteries
are not interchangeable.
Figure 50: Deployment tool battery charger
T
able 13: Deployment tool battery charger key
a battery charger (must be ordered separately)
b battery charger cable
Charging the deployment tool battery
1.
Set up the deployment tool battery charging equipment.
Remove the deployment tool battery, charger, and charger cord from the yellow
case.
2. Charge the deployment tool battery.
Connect the charger cord plug into the battery. Connect the red alligator clip to the
positive lead of the charger, and the black clip to the negative lead of the charger.
Connect the battery charger to the AC mains.
3. Remove the deployment tool battery from the charger after it is charged.
The battery must charge for at least six hours.
Deployment tool
DMC DECT Fundamentals August 2012 79