User's Manual

Figure 26: Additional critical points and cell boundaries
Marking the points, centres, and boundaries on the floor plan
This section describes how to label critical points, cell centres, and cell boundaries on the floor
plan.
Mark the information clearly on the floor plans during the survey
. The customer, the sales group,
the installer, and maintenance personnel must read these floor plans.
Use a different colour for each cell. Use the same colour for each cell centre and its
corresponding cell boundaries. Indicate the information on the floor plan as follows:
• critical points – mark the following on the floor plan:
Figure 27: Critical point marker
•
cell centres – mark the following on the floor plan:
Figure 28: Cell centres marker
•
cell centre - label each as xCn where x is the floor and n is the next sequential cell
centre.
• cell boundaries – mark wide, coloured lines on the floor plan.
Deployment
DMC DECT Fundamentals August 2012 63