User's Manual

Record this information.
6.
Ask about the mobility of the users. For example, do the users move from cell to
cell, or is the area of movement restricted, such that the users remain within one
cell?
Record this information.
Deployment
A
deployment determines the locations of basestations and cells. The deployment process
consists of the following steps.
•
Identifying initial critical points on the floor plan on page 58.
• Locating cell centres on page 59.
• Determining cell boundaries on page 61.
• Identifying critical points and cell boundaries on page 62.
• Marking the points, centres, and boundaries on the floor plan on page 63.
Identifying initial critical points on the floor plan
A
critical point is a place that can be difficult for the radio signal to reach, such as a corner of
a room, lifts and stairwells. Initial critical points are shown in
Figure 22: Critical points on
page 59
as P1, P2, P3, and P4.
Figure 22: Critical points on page
59 shows the following:
• stairwell
• second floor plan
Site planning
58 DMC DECT Fundamentals August 2012
Comments? [e-mail]