User's Manual

System type Cabinet
s
DMC8 DMC8-
E
Basestatio
n
Handse
t
PRI
Cards
MC32
Cards
MG 1000E
Chassis with
Expander (one-
shelf
configuration)
2 4 1 40
††
2550
1 2
MG 1000E
Chassis with
Expander (two-
shelves
configuration)
4** 9 2 88
††
5610
1 4
MG 1000E IPE
shelf –MG XPEC
(one-shelf
configuration)
1 13 1 112
††
7140
0 2
MG 1000E IPE
shelf –MG XPEC
(two-shelves
configuration)
2** 26 2 224
††
14280
0 4
** Clock synchronization with the main cabinet or MG is
mandatory
. ** Clock synchronization with the main
cabinet or MG is mandatory. See section “Overview
Avaya Communication Server 1000E” for details.
† Due to the maximum number of DCS sets per DMC
card. Subject to engineering rules and constraints.
†† Due to the maximum number of basestations per
DMC card. Subject to engineering rules and
constraints.
For CS 1000E systems (MGC based), a clock controller must be installed in the cabinet.
Therefore you must install a PRI card with a NTAK20 Clock Controller Daughterboard.
A Media Gateway Card (MGC) installed in an MG 1000 chassis (with MG 1000E Expander),
or an MG 1010E chassis provides 128 DSP ports. The maximum number of simultaneous calls
between the trunks or lines connected to this Media Gateway, including DECT sets subscribed
to DMC cards in this chassis, and any endpoints outside the Media Gateway is limited to
128.
Each DMC card supports up to 32 DSP ports. For a non-blocking call solution, the maximum
number of DMC cards that can be installed in an MG 1000 / MG 1010E is limited to four. If four
are not sufficient, an extra MC 32 card is required for each additional DMC card. A non-blocking
solution for a DECT system requires special planning in terms of the available channels on the
basestations covering certain areas as well as the distribution of DCS blocks among the DMC
cards available in the system.
If a cabinet or Media Gateway has a number 9 slot, it must be provisioned with a DMC8-E card.
All other cards are DMC8s.
Engineering guidelines
40 DMC DECT Fundamentals August 2012
Comments? infodev@avaya.com