User's Manual

Figure 219: DECT interface
Items to monitor
The DS30 driver and IPC driver tasks are the most informative for preliminary investigation.
They track message passing through the debug task.
The DS30 driver and IPC driver tasks
provide detail on:
• Messages received and sent through the DS30 driver task from/to the PBX, and from/to
the BCU software.
• Messages received and sent through the IPC driver task from/to the BCU software, and
from/to the EuroISDN link (inter processor link).
Monitor port physical connection
The DMC8 debug port connections allow the DMC8 to be connected as Data Communications
Equipment (DCE) to a COM port of a PC (the Data
Terminal Equipment [DTE]).
DMC8 debug port
The debug port of the DMC 8 is connected directly from the MDF BIX block.
DMC8 debug port
328 DMC DECT Fundamentals August 2012
Comments? [e-mail]