User's Manual

Note:
When connecting to the DMC8 relay board using modems, jumpers J6, J7, J8, and J9 must
be strapped for V.24 on the DMC.
Open the DMC DECT Manager System window. Complete the steps in Adding a new DECT
system on page 322.
Adding a new DECT system
1. Click File.
2. Click Add.
3. Click the General tab.
4. Identify the DECT system name.
Enter a DECT System Name, and click the Apply button.
5. Click the Communication tab.
6. Enter the IP Address of the DECT relay board.
7. Click Serial.
8. Click the Details button.
9. Enter the DMC DECT Manager Server IP Interface.
This is the IP address entered as the Client IP address in Configuring connection
properties on page 319, Step 15.
10. Choose the COM Port to which the local modem is connected.
11. Enter the Phone Number of the remote modem.
12. Click OK.
13. Enter values in the Access Right Identification and Parameters tabs according to
normal operating procedures.
14. Click the Alarm tab.
15. Define the DMC DECT Manager Server IP Interface IP address.
Enter the DMC DECT Manager Server IP Interface IP address in the Upstream
Manager IP addressfield.
16. Click the Apply button
17. Click the OK button.
The DECT system is now added to DMC DECT Manager. All the DMC DECT
Manager features and functions continue to operate normally.
Note:
The modem connection can slow the completion time for some operations.
Changing the DMC8 jumper setting after DECT system upgrade to Release 5.0
322 DMC DECT Fundamentals August 2012
Comments? [e-mail]