User's Manual

Configuring NetBEUI Protocol
Y
ou must first install NetBEUI Protocol if it is not already installed on the DMC DECT Manager
Server PC.
Figure 217: Networking tab of the Local Area Connection Properties
Complete the steps in Configuring NetBEUI Protocol on page 317
to configure NetBEUI
Protocol:
Configuring NetBEUI Protocol
1. Open the Network and Dial-up Connections dialog box.
Select My Network Places, right-click it, and select Properties.
2. Open the Properties dialog box for Local Area Connection.
Select Local Area Connection, right-click it, and select Properties.
Connecting a DECT system to DMC DECT Manager using remote modems and Windows 2000
DMC DECT Fundamentals August 2012 317