User's Manual

Click the button to the right of the DECT PM Database: field, or select Database on
the toolbar
, and then Select Database from the Database menu. See
Figure 211:
Select an existing database on page 301.
3. Open a database.
Click on a database to select it, and click the Open button.
4. Select Reports > Reports or Trends.
Select Reports on the toolbar, and select Reports or Trends from the Reports
menu.
You can now generate Reports and Trends.
Figure 211: Select an existing database
DECT Performance Manager data
This section describes the most relevant performance data.
The data is collected during
operation of a DECT system. The performance data is statistical and can be used to identify
potential problems. The performance data consists of counters that represent a number of
events.
The DECT manager retrieves the data from the DECT system within a defined interval period.
During this interval, the Performance Manager measures objects by retrieving events
(counters).
Important:
Counters represent a number of events. For example, the 'voice call' counter increments
when a PP
successfully sets up a voice call. During the voice call, the PP does not increment
the counter. If a voice call (in progress) extends beyond the performance data retrieval
period, the voice call is not marked in the new retrieval period. It is only marked in the period
in which it began. In the new retrieval period, a dropped call can appear, but the continuing
voice call is not identified. Avaya recommends making the retrieval period long enough to
allow most voice calls to finish within one retrieval period (minimum value is 15 minutes).
Performance Collection
DMC DECT Fundamentals August 2012 301