User's Manual

Retrieve upm and epm files
Use the Performance Collection application on DMC DECT
Manager to retrieve upm and epm
files.
Note:
The Performance Collection application (used with DMC DECT Manager up to and including
Release 2.0) allows files to be collected from a single board only at one time. However, it is
possible to collect from multiple boards on the DECT system if the DMC DECT Manager
patch 20050su1 is installed. The patch is available on the MPL.
Retrieving upm and epm files
1. Create a folder to be the Collection Location.
Use this folder to store the retrieved upm and epm files.
2. Connect to the DECT system.
Follow the instructions on Logging into the DMC DECT Manager on page 229
to
Connecting to a DECT system on page 179.
3. Select Applications > Performance Collection.
Select Applications on the toolbar, and select Performance Collection from the
Applications menu.
4. Browse for the folder in which to store the upm and epm files.
Click the Browse button under Collection Location and navigate to the folder you
created in Step 1.
5. Select the Retrieve User Performance Collection data, per portable and Retrieve
Equipment Performance Collection data, per DECT System check boxes.
6. Select the board or boards from which to collect the upm and epm files.
Enter the DMC TNs of the boards.
7. Select the collection period from the Collection Period: drop-down list.
Use a 15-minute collection period for the most detailed results. For less detailed
results, use a longer collection period. A minimum of two files is required for the
Performance Manager to work.
8. Click the Start button.
When the Performance Collection starts, upm and epm files are stored in the
Collection Location at intervals specified in the Collection Period.
To close the Performance Collection window, click the Cancel button. (The
Performance Collection continues while the window is closed.)
9. Click the Stop button to stop the Performance Collection.
System maintenance
294 DMC DECT Fundamentals August 2012
Comments? [e-mail]