User's Manual

Set date and time on DMC DECT Manager
Y
ou must set the date and time on the DMC DECT Manager before retrieving upm and epm
files from the DECT system. This ensures a more accurate Report or Trend when using the
DECT Performance Manager.
Setting the date and time on the DMC DECT Manager
1. Connect to the DECT system.
2. Select File > Properties.
Select File on the toolbar, and select Properties from the File menu. The Properties
window opens. See
Figure 202: DMC DECT Manager-DECT System Properties
window - Alarm tab on page 293.
3. Click the Alarm tab.
4. Change the date and time.
5. Save changes.
Click the Apply button, then click OK.
Figure 202: DMC DECT Manager-DECT System Properties window - Alarm tab
Performance Collection
DMC DECT Fundamentals August 2012 293