User's Manual

Disconnecting/reinstalling a basestation
1. Disconnect the RJ45 cable, MDF side.
Unplug the RJ45 cable from the wall socket of the RJ45 Connection Box.
2. Disconnect the RJ45 cable, basestation side.
3. Remove the unserviceable basestation from the mounting plate.
4. Reinstall a serviceable basestation on the mounting plate.
5. Re-connect the RJ45 cable to the basestation.
6. Re-connect the RJ45 cable, MDF side.
Uploading and activating firmware
System maintenance
284 DMC DECT Fundamentals August 2012
Comments? [e-mail]