User's Manual

Inserting a serviceable DMC8 card
Figure 190: DMC8 card insertion
Complete the following steps.
Inserting a serviceable DMC8 card
1.
Insert the DMC8 card.
Lever the card into the shelf backplane and latch the card locking devices.
2. Connect the faceplate cables.
Insert the faceplate cables into the DMC8 card, and into the cards on either side of
it.
3. Disconnect the maintenance bypass cable.
Remove the maintenance bypass cable from the Maint port of the DMC8 cards on
either side of the replaced DMC8 card.
System maintenance
278 DMC DECT Fundamentals August 2012
Comments? [e-mail]