User's Manual

To remove, re-seat, or insert DMC8 card, perform the following actions:
• Backup the data from the DMC8 card to be removed.
• Remove the faulty DMC8 card.
• Insert a working DMC8 card.
• Restore the data to the DMC8 card that was replaced.
Backing up a DMC8 card configuration and subscription
information
Figure 188: DMC window
Complete the following steps.
Backing up a DMC8 card configuration and subscription information
1. Using Windows, login to DMC DECT
Manager. Select the system that supports the
DECT system. Launch the DECT application. Open the DECT Systems window.
Open the Boards window.
Follow the instructions:
•
Logging into the DMC DECT Manager on page 229
• Selecting the PBX that supports DECT on page
230
•
Launching the DECT application on page 187
2.
Select the DMC8 card.
Highlight the DMC8 card in the list.
3. Save the DMC8 data on the DMC DECT Manager.
From the Synchronization menu, click on Synchronize From.
System maintenance
276 DMC DECT Fundamentals August 2012
Comments? [e-mail]