User's Manual

https://voffice.innovatia.net/PWA/Avaya%20UC%202011%20-%20Sustaining
%20WIs/Project%20Documents/Forms/AllItems.aspx
3.
Open the DECT System Properties dialog box.
From the File menu, click on Properties. Click the Parameters tab.
4. Change the parameters.
From the appropriate menus, highlight the parameter time/level.
5. Accept the changes.
Click the OK button.
Keeping or removing non-operational DMC8 cards from
DMC DECT Manager
Note:
xx only appears when a connection is established and there is a mismatch. If there is a
permanent connection and the DECT system configuration changes, the DMC DECT
Manager is updated automatically. The change is noted in the DMC DECT Manager event
log.
Figure 184: Synchronize DECT Board Configuration window
Complete the following steps.
Keeping or removing non-operational DMC8 cards from DMC DECT Manager
1.
To keep DMC8 cards,
Delete the check mark from the appropriate box.
2. To remove DMC8 cards,
Keeping or removing non-operational DMC8 cards from DMC DECT Manager
DMC DECT Fundamentals August 2012 261