User's Manual

Follow the instructions:
• Web-based browser access to the DECT application
• Web Administrator Login
• Opening the Web current Status
• Opening the web System navigator
3. Open the DECT Systems Properties dialog box.
From the File menu, click on Properties. Click the Alarm tab.
4. Change the Upstream Manager IP address.
Enter the Upstream Manager IP address.
5. Accept the changes.
Click on the OK button.
Changing the time and date
The time and date is used to time stamp the alarms.
Note:
The time and date must be changed when the DECT
system reboots or a DMC resets.
Complete the following steps.
Changing time and date
1. Using Windows, login to DMC DECT Manager. Select the system that supports the
DECT system. Launch the DECT application. Open the DECT Systems window.
Follow the instructions in
Logging into the DMC DECT Manager on page 229 and
Launching the DECT application on page 187.
2. Using a web-based navigator, open the Administrator login screen and login. Select
the System Navigator. Select the system that supports the DECT system. Launch
the DECT application. Open the DECT Systems window.
Follow the instructions in:
• Web-based browser access to the DECT application
• Web Administrator Login
• Opening the Web current Status
• Opening the web System navigator
3.
Connect to a DECT system.
From the Applications menu click Connect or the green icon:
Modifying system properties
DMC DECT Fundamentals August 2012 259