User's Manual

From the File menu, click on Properties, and click on the Access Right Identification
tab.
4.
Change the PARI or SARI.
Enter the PARI or SARI.
5. Accept the changes.
Click on the OK button.
Changing the Upstream Manager IP address
Note:
An upstream manager IP address can only be programmed on the DMC8 Relay card.
Figure 182: DECT Systems window and DECT System Properties - Alarm tab
Complete the following steps.
Changing the Upstream Manager IP address
1. Using Windows, login to DMC DECT Manager. Select the system that supports the
DECT system. Launch the DECT application. Open the DECT Systems window.
Follow the instructions in Logging into the DMC DECT Manager on page 229 and
Launching the DECT application on page 187.
2. Using a web-based navigator
, open the Administrator login screen and login. Select
the System Navigator. Select the system that supports the DECT system. Launch
the DECT application. Open the DECT Systems window.
System administration
258 DMC DECT Fundamentals August 2012
Comments? [e-mail]