User's Manual

Changing a PARI or SARI
Note:
When the PARI or SARI changes, the DECT system resets and the connection closes. If
the connection is permanent, the DMC DECT Manager attempts to open in the
background.
Figure 181: DECT Systems window and DECT System Properties - Access tab
Complete the following steps.
Changing a P
ARI or SARI
1. Using Windows, login to DMC DECT Manager. Select the system that supports the
DECT system. Launch the DECT application. Open the DECT Systems window.
Follow the instructions in
Logging into the DMC DECT Manager on page
229 and
Launching the DECT application on page 187
.
2. Using a web-based navigator, open the Administrator login screen and login. Select
the System Navigator. Select the system that supports the DECT system. Launch
the DECT application. Open the DECT Systems window.
Follow the instructions:
•
Web-based browser access to the DECT application
• Web Administrator Login
3.
Open the DECT Systems Properties dialog box.
Modifying system properties
DMC DECT Fundamentals August 2012 257