User's Manual

Follow the instructions in Logging into the DMC DECT Manager on page
229 and
Launching the DECT application on page 187
.
2. Using a web-based navigator, open the Administrator login screen and login. Select
the System Navigator. Select the system that supports the DECT system. Launch
the DECT application. Open the DECT Systems window.
Follow the instructions:
•
Web-based browser access to the DECT application
• Web Administrator Login
• Opening the Web current Status
• Opening the web System navigator
3. Open the DECT Systems Properties dialog box.
From the File menu, click on Properties, and click on the Communication tab.
4. Select Ethernet.
Click on the Ethernet radio button.
5. Accept the changes.
Click OK.
Changing the IP address on the DECT system DMC8 Relay card
Before changing the IP
address of the DMC8 Relay card through Telnet, close the connection.
After the change on the DECT system, open the connection as a safety check.
Modifying system properties
DMC DECT Fundamentals August 2012 255